SoundHorse (Sigafoos) Series 1 Race Glue-on Shoes Fronts
The SoundHorse Series 1 Glue-on cuffs are a superb solution for problem feet.
The Sigafoos Series I™ horseshoe system is fast & simple. It is fitted to the horse’s hoof just like a conventional horseshoe. Although the aluminum Race Series I™ shoe cannot be heated, it can be easily cold formed and shaped with conventional farrier tools. The shoe is quickly and securely bonded to the hoof wall by saturating the fabric with an acrylic adhesive. The shoe is then stretch wrapped to the hoof for 10 minutes while the adhesive sets – there is no need to hold the hoof off the floor. Using the stretch wrap system, the horse is fully weight bearing immediately after the shoe is applied and full work can resume shortly after the horse is shod. We recommend the horse stay out of the mud & water for 12 hours to allow full adhesive cure.
The patented cuff attachment system uses acrylic adhesives to bond to the entire hoof wall safely generating twice the holding strength of nails. The strongest attachment possible -- particularly with cracked, thin, broken, brittle and shelly feet -- is achieved with no glue on the bottom of the hoof and no risk to hoof integrity. This is the best method to overcome your horse's sensitivity to nails.
Fitting Instructions: SoundHorse Series 1 Application Instructions
Please select your choice from the options below:
*PLEASE NOTE - all prices are Excl. VAT